Netgear open source router

Netgear recently launched the WGR614L wireless router targeted specifically at open source firmware enthusiasts. It can use Tomato, DD-WRT, and soon OpenWRT. The core is a 240MHz MIPS processor with 16MB of flash and 4MB of RAM. You’ll probably remember when Linksys decided to dump Linux from their iconic WRT54G line in favor of VxWorks; they released the similarly speced WRT54GL for enthusiasts. Netgear seems to be arriving pretty late in the game, but they’ve set up a community specifically for this router. Time will tell whether community support is enough to make this the router of choice for hackers. We wish someone would release an x86 based router in the same price range just to make porting stupidly simple.

wireless bootloading

Wireless Bootloader Demonstration from Nathan Seidle on Vimeo.
Tired of having to physically connect to your microprocessor to upload new code? Just do it over a wireless connection. [Nathan] takes us through the process of setting up a wireless bootloader for the ATmega168. He is using the XBee base and remote modules for the wireless communication. While people have been doing wireless bootloading with the Arduino already, [Nathan] found that it was common for them to have timeout issues. His remedy was to make his own custom one that is much faster. He’s asking for help though. At this point it is tested and working, but he needs someone with more programming knowledge to help him make it “drop-in” compatible with the Arduino IDE.

N8VEM computer with a 3Km wireless link

[James] sent in this project in which he built a tiny computer with text based OS and a 3Km wireless link. The details are a bit scarce, but he used an N8VEM, a Propeller Pocket Term, a 4 line LCD and an RF Transceiver to build it. It runs CP/M, the text based operating system and uses less than a half of a watt, without the vga monitor. With a total cost of 145 and 4 serial ports for sensors, this thing could come in handy. Especially since its low power consumption could allow it to be solar powered. You may recall the N8VEM from an earlier post we did.

External antenna on Panasonic CF-R1

[Steven] managed to get his hands on a Panasonic CF-R1 for pretty cheap. Though it is a decently powerful machine, it was built in 2002 and didn’t come with an internal wireless card. It did, however have a mini-PCI slot. [Steven] promptly installed a wireless card, but found the internal antenna lacking. The solution was to custom mount an external antenna. Mounting it was fairly easy, he removed the phone jack and epoxied the connector in its place. The reception was greatly improved. He says he went from seeing 6 access points to 31 as soon as he installed it. Similar things have been done to the Eee PC 900.

Eye-Fi teardown

[les robots] had a defective Eye-Fi card on his hands and when a replacement was sent, he was told to destroy the original. What better way to ‘destroy’ something than opening the case? The Eye-Fi is an SD card with a builtin WiFi radio so it can upload images while remaining in camera. One version uses Skyhook’s location service to geotag photos. You can see a few photos of the dismantled card on Flickr. The board is manufactured by Wintec. The wireless side is handled by Atheros’ ROCm, the same low power Radio-on-Chip module you would find in a mobile phone. The flash memory comes from Samsung and the antenna is along the back edge, where it has the best chance of getting signal.

Wireless TAC-2 joystick

[Aki] had a broken TAC-2 joystick that was just begging for some new and improved use. Since it was the cable that was broken, [Aki] had the idea to make it wireless. He designed custom boards for the transmitter and receiver. Each is controlled by an ATTiny2313. He fitted it with the stock connector so it could possibly even still work on a commodore 64. He hasn’t tested that yet though.

[via the Hack A Day flickr pool]

WiFi and Bluetooth tethering on Android

Many G1/ADP1 owners have been using the app Tetherbot to get internet access on their laptop via USB to the phone’s data connection. The app relied on the Android Debug Bridge to forward ports. It worked, but people wanted a solution better than a SOCKS proxy. The community figured out a way to create a properly NAT’d connection using iptables and then [moussam] rolled them up into easy to use applications. There’s one for setting up a PAN device on Bluetooth and another for adhoc WiFi networking. It requires you to have root on your phone, but hopefully you’ve achieved that and are already running the latest community firmware.